Published 4 November 2026 · Updated 18 November 2026 · autowerkeengines.com
The first start after a used BMW engine is installed
The first start is a procedure, not a celebration. Buyers writing to autowerkeengines.com are asked for the VIN before anyone discusses price.
What to look at
The first start is a procedure, not a celebration. Buyers writing to autowerkeengines.com are asked for the VIN before anyone discusses price.
The detail that decides the purchase
Prime the oil system before the engine fires. A dry start on a fresh used engine is a common way to damage bearings that were fine in the crate.
Fitment
Use the oil grade the engine family requires, fill the filter, and check for leaks at the cooler and the sump plug before the car is driven.
What the workshop writes down
Coolant is bled with the heater open and the front of the car level. An air lock looks like a head-gasket failure and often is not one.
How to order
Listen for a minute at idle. A rattle from the timing drive or a knock that was not in the workshop notes should stop the job before a road test. Write to autowerkeengines@gmail.com or WhatsApp +49 15510 030835 and include the VIN.
Shipping and warranty
Eligible engines ship from Hamburg for a flat 249 € to the address on the order. A forklift or an engine crane is needed at delivery. Eligible internal failure is covered for up to 12 months after a correct workshop installation. A mismatched engine, a dry start, and the wrong oil are not covered.
More guides
- How to read a BMW engine listing before you pay
- What a compression test tells you before the engine is shipped
- Match the replacement engine to the VIN, not just the badge
- Petrol six or diesel four: pick the long block the car was built with
- What a used BMW engine warranty covers after installation
- How a complete BMW engine is crated and shipped
- N55, B58, and B48: three petrol families that do not interchange
- N47 and B47 diesels: fitment notes for 320d and 520d
- When the gearbox has to be considered with the engine