Published 15 October 2026 · Updated 18 November 2026 · autowerkeengines.com
What a compression test tells you before the engine is shipped
A compression test is a set of numbers, one per cylinder, taken on a warm engine with the throttle open and the same cranking speed. At.
What to look at
A compression test is a set of numbers, one per cylinder, taken on a warm engine with the throttle open and the same cranking speed. At autowerkeengines.com, the code stamped on the block is checked against the listing title, not against the badge on the boot lid.
The detail that decides the purchase
Leak-down is the clearer test when numbers are uneven. It shows whether the loss is rings, valves, or head gasket. A N54 with one low cylinder is a different purchase from a N54 with even figures.
Fitment
Ask for the gauge readings written down, not a sentence that says the engine is healthy. Healthy is not a measurement.
What the workshop writes down
Do not compare a cold test on one engine with a hot test on another. The method has to be the same or the numbers are not comparable.
How to order
A test done after the engine has been removed is not the same as a test done in the car. The listing should say which one was performed. Write to autowerkeengines@gmail.com or WhatsApp +49 15510 030835 and include the VIN.
Shipping and warranty
Eligible engines ship from Hamburg for a flat 249 € to the address on the order. A forklift or an engine crane is needed at delivery. Eligible internal failure is covered for up to 12 months after a correct workshop installation. A mismatched engine, a dry start, and the wrong oil are not covered.
More guides
- How to read a BMW engine listing before you pay
- Match the replacement engine to the VIN, not just the badge
- Petrol six or diesel four: pick the long block the car was built with
- What a used BMW engine warranty covers after installation
- How a complete BMW engine is crated and shipped
- N55, B58, and B48: three petrol families that do not interchange
- N47 and B47 diesels: fitment notes for 320d and 520d
- When the gearbox has to be considered with the engine
- The first start after a used BMW engine is installed